NOTE THIS SITE HAS BEEN UPDATED & MOVED
The new address is
Please book-mark the new site when it appears.
You will be re-directed in 10 seconds
YOU MUST MENTION THE POST-TANKS-GIVING SPECIAL TO GET THE DISCOUNTS AND FREEBIES, AS THIS IS ONLY OFFERED TO FORUM MEMBERS.
THESE ARE SPECIAL FORUM MEMBER PRICES.
If you don't mention the Post-TANKS-Giving Special, I won't know you are from the Forum and will quote the web page prices
For more information, please send an email or call 714-612-5956.
I am having a real blowout TANKS-Giving sale for a limited time. Purchase a brand spanking new 88 Cu Ft Carbon Fiber GREAT WHITE tank and get a huge discount.
With either tank and Hose Assembly, you will receive a Free Stainless Steel Male Quick Disconnect to Male Quick Disconnect Adapter to fill at a paintball shop (worth $29), and a Free Stainless Steel Dead Head (worth $19) So that is up to $148 in savings if you order before Dec 1st.
Male Quick Disconnect to Male Quick Disconnect Dead Head .
GREAT WHITE
Version 1) $538 with rebuilt SCBA valve (tank on far right). This would be for people that already have one of my high quality SCBA Air Hose Assemblies or prefer an SCBA Valve so they can constantly see the pressure in the tank, or wish to fill at a Fire station, etc.
Version 1B) If you buy this tank and wish to buy my Stainless Steel SCBA Hose Assembly, I'll furhter discount my Stainless Steel Hose Assembly from the normal $169 down to $100 so that the total is still only $638.
Version 2) $638 with DIN300 valve and Hose Assembly (tank on far left). Nicest you will ever see. Hoses have large strain relief on each end to help prevent kinking, with BAR & PSI scales (so no guessing about the PSI you are putting in your tank). Everything you need to fill a Marauder, from tank to hose, i.e. LARGE High Quality 2.5" Glycerin-Filled Dual BAR & PSI gauge (no guessing for PSI), Improved Bleeder, Hose with large Strain Relief at each end to prevent kinking, and Stainless Steel Female Quick Disconnect included at no additional cost.
The second tank is my very portable 17 Cu Ft 4500 PSI
AIR TANK called the "Guppy". They weigh Only 3.3 Lbs & Measure
under 11.5" long by 4.5" diameter. These are ideal for those that want to
backpack a tank when hunting. If you have an FX Rifle with 180 CC Air Tube,
Fill to 3000 and refill to 2000, you would get about 13 refills with this tiny
tank. If you have a Marauder (IIRC the tube is 210) Fill to 3000 PSI and
refill to 2000, you would get about 11 refills
Version 1) $279 With rebuilt SCBA valve (middle left tank) with
rebuilt SCBA valve (tank on middle left). This would be for people that
already have one of my high quality SCBA Air Hose Assemblies or prefer an SCBA
Valve so they can constantly see the pressure in the tank, or wish to fill at
a Fire station, etc.
Version 1) $379 with rebuilt SCBA valve and SCBA Hose Assembly.
If you buy this tank, Brand New Stainless Steel SCBA Hose Assembly will be
discounted from the normal $169 down to $100 bringing the total to only $379.
Version 2) $359 with DIN300 valve and hose assembly (middle right tank).
Nicest you will ever see. Hoses have strain relief on each end to help prevent
kinking, LARGE glycerin filled gauge with BAR & PSI scales (so no guessing
about the PSI you are putting in your tank). Everything you need to fill a
Marauder, from tank to hose, gauge, bleeder, and female quick disconnect.
I also sell just the valve, hose and gauge if you have an SCBA tank and want
to convert it.
AIR HOSES, FITTINGS & ADAPTERS for DIN300 SCUBA, SCUBA YOKE, SCBA,
Nitrogen, Helium, etc
PLEASE EITHER
CALL 714-612-5956 OR EMAIL
All hoses are discounted for forum members from my web prices, and further reduced when
purchased with one of my 4500 PSI tanks. This is a Yellow Forum Special. I
have these hose assemblies listed for higher on other sites. You MUST mention
the Yellow Forum to get the discount..
My tank fitting is a quality stainless steel hand-tight fitting, (no tools
necessary to remove) gauges are stainless steel and liquid filled and read in
both PSI and BAR, the bleeders are the high quality stainless steel with a
large thumb wheel to bleed. All hoses are MicroBore, and are the only
type sold with a strain relief at each end. The hose is 3 foot long and only
0.070" in diameter for minimal air waste and are rated 6,900 PSI Working
pressure and +20,000 PSI burst. The hose terminates in a Foster type female
quick disconnect (fits Daystate, Crosman, etc.) Everything is top notch and I
have over 100 feedbacks (all positive) on the BOI.
HOSE ASSEMBLIES
SCBA HOSE ASSEMBLY
Here is my 3 Foot Stainless Steel Hose Assembly with 0.070 inch ID micro-bore
hose, strain relief at each end and Stainless Steel "Foster" type quick fill
on the end , stainless steel Liquid Filled BAR/PSI Gauge, Highest Quality
Stainless Steel Bleeder and Stainless Steel Handtight Connector = $139 + $14.50 shipped priority mail and insured. Rated
to 6900 PSI.
DIN300 SCUBA HOSE ASSEMBLY
Same as above with high quality hose rated at +6900 PSI, stainless steel
hand-tight DIN300 fitting, stainless steel disconnects and stainless steel
bleeder, stainless steel Glycerin Filled Gauge and MicroBore hose with
strain relief at each end as our SCBA Hose Assembly, etc., but made for use
with DIN300 SCUBA tanks (Rated +4500 PSI) or other type of Carbon Fiber air
tanks (not fireman type). This is a great replacement for hose those who
currently have a 4500 PSI SCUBA tank. $149 + $14.50 shipped priority mail and
insured.
SCUBA Yoke HOSE ASSEMBLY
Same as above with high quality hose rated at +6900 PSI, stainless steel
disconnects and stainless steel bleeder, stainless steel Glycerin Filled Gauge
that reads both PSI and BAR, and MicroBore hose with strain relief at
each end as our SCBA Hose Assembly, etc., but made for use with SCUBA tanks
with SCUBA Yoke.
Note: Most SCUBA tanks and Yoke are only rated to 3000 PSI. This is the
heaviest duty Yoke made and is the ONLY one rated to 4000 PSI. It is
extremely sturdy (The nicest I've seen).
Normally $169, only $139 if you mention the Yellow Forum (no tank purchase
necessary).
NOTE: SCUBA, SCBA, Nitrogen and other Hose Assemblies are also available as
a CASCADE SYSTEMfor 2 or more tanks and any combination. See my website
for more information on custom hoses, etc. Two 44 Cu Ft tanks can actually be
better than one 88 Cu Ft tank when cascaded together with this system. SCBA
shown on Left, SCUBA Yoke on right (also available in DIN300, and other
fittings). Can also mix a SCUBA tank to bulk fill the airgun, and an SCBA to
top it off or any other combination you want.
Regulated Hose Assemblies. Available for SCUBA, SCBA, Nitrogen, etc.
Useful for filling airguns from a 6000 PSI tank, or if you wish to shoot your
rifle from a bench while tethered to your air tank so that you have a constant
fill pressure (great for big bore rifles too!). Also fill your smaller air
tank from a large 6000 PSI tank. Many other uses too!
MICROBORE AIR HOSES (Fit Air Pumps, Hose Assemblies, etc.
I have 1, 2, and 3 foot air hoses in stock. These come with 1/4" or 1/8" Male
NPT if you are assembling a hose, etc., but I also have BSPP if you wish to
install on a pump, Tanks, etc.
Rated at 6900 PSI and only 0.070" diameter with strain relief at each end.
These hoses are so small in diameter, that for one foot of paintball hose, you
could use 12 feet of this hose and still save air! Normally $39, only $34
if you mention the Yellow Forum I also have 5 Ft lengths if necessary.
I also have all kinds of fittings, gauges, tanks, etc. on my website
http://www.hamcontact.com/airgun/HoseAssembly/
Hoses are shown here with optional male and female connector on each end.
REDUCED: Air Hose & Extensions with Stainless Steel Male and Female Quick
Disconnects.
>
Please call 714-612-5956 or email.
I ordered a huge amount of Stainless Steel fittings, and so I am offering
almost a $40 discount on my Air Hose Extension with Stainless Steel Male and
Female ("Foster" type) Quick Disconnects. Normally these would be $107, I am
offering these for $69 plus $6 shipping ($8 if using paypal).
This is 3 Foot long with Stainless Steel Female and Male "Foster" type quick
disconnects on either end as seen here. (Most popular is the 3 foot hose, but
other sizes available). Also available with other types of connectors as well,
just call for more information.
If you prefer to fill your tank at a SCUBA shop that doesn't have an SCBA
adapter, we have that adapter. If you want to fill it at a place that fills
paintball tanks, we have that adapter too. We have all kinds of adapter and
fittings, so please check out our website
http://www.AirTanksForSale.com/
Note: All adapters are
described from left side to right.
http://www.hamcontact.com/airgun/HoseAssembly/IMG8009crop_small.JPGDIN300
(SCUBA) to Hand Tight Stainless Steel SCBA Fitting. For filling SCBA tanks at
a SCUBA Dive Shop. $89
"
Yoke (SCUBA) to Hand Tight Stainless Steel SCBA Fitting. $89
Stainless Steel Male Paintball (Foster type) to Hand Tight Stainless Steel
SCBA Fitting. For filling SCBA tanks at places that fill paintball tanks $79.
Fire House Adapter = Stainless Steel Male DIN300 (SCUBA) Hand Tight to
Stainless Steel Male SCBA Fitting. Good for two uses. 1) For using my high
quality hoses with a SCUBA tank, or 2) for filling SCUBA tanks at a fire
house. Note: These are NOT brass fittings, but ALL STAINLESS STEEL. These dont
require a wrench. Just hand-tighten onto your tank and you are ready to go.
Stainless Steel Male Paintball to Male Paintball Fitting $29. For
filling airtanks via their hose assembly at a paintball store, or SCUBA shops
that fill paintball tanks
Stainless Steel 1/8" Male NPT to Male Paintball Quick Disconnect $19 (Left)
Stainless Steel Female Paintball Quick Disconnect to 1/8" female NPT $19
(right)
$29 for the mated pair in Stainless Steel.
Stainless Steel Female Paintball Quick Disconnect to 1/8" Female NPT $19
Stainless Steel Female Paintball Quick Disconnect to 1/8" Male NPT $19
Stainless Steel Male Paintball Quick Disconnect to 1/8" Male NPT $19.
Male Paintball Quick Disconnect to 1/8" Female NPT $19.
Dead Head (No, Not the Jerry Garcia type, the kind you put on the end of a
SCUBA tank's hose to determine your remaining tank pressure). Now in Stainless
Steel $19
(LEFT) 2.5" Stainless Steel, Glycerin-filled Gauge with PSI & BAR readout and
1/4" NPT $29. (color of scale may vary, i.e. Red, Blue, etc.) Also available
in 1/8" BSPP back or bottom mount (to upgrade other air tanks and hand pumps)
$32
(RIGHT) READ THE PRESSURE OF YOUR SCUBA or SCBA TANK WITH THIS GAUGE. If you
would like an accurate gauge, that reads in BAR and PSI to easily measure the
pressure inside your airtank, this is it. Just connect the male
"Paintball/Foster" type Male Quick Disconnect to your air hose, and that's it!
Only $49.
1" (23mm) High Quality Metal Gauge with BAR readout. Excellent replacement for
most air guns, air tanks, etc. These are very nice gauges, not like paintball
stuff.
Available in 1/8" BSPP back mount $35
PROBE ADAPTERS
DOH!!! Need to update picture!! This is NOW IN STAINLESS STEEL! Dowdy Seal
with 1/8" Female BSPP to Male Quick Disconnect (Fits FX, newer Air Arms, etc.)
1/4" Female BSPP to Male Quick Disconnect (Fits Theoben Rapid, Condor/Talon,
etc.). This is shown on the right with Condor/Talon Adapter (Black
Condor/Talon Bottle Adapter available separately). Note: Some Condor adapters
that have the extra fitting to reduce the thread size (for use with hand pump)
require the 1/8" BSPP instead (listed above).
JIC Fitting to Male Quick Disconnect, seals with taper (Fits Korean Air Guns,
I.e. Career, etc.)
One Pieces DIN200 to Male Paintball Quick Disconnect (Fits Steyr, Feinwerkbau,
etc.) $39
Theoben Rapid Quick Fills
I am offer 2 kinds of quick fills. The first is an in-stock quick fill for
Theoben Rapids. No longer will you need to unscrew the bottle one turn, burp
the action for a few shots, remove the bottle, find the special adapter, then
get a wrench for your special bottle adapter to tighten it, fill the bottle,
and screw the bottle back on the rifle. Now, with this in-stock fill all you
need to do is hook up the female quick disconnect to your hose directly to
this male on the rifle. These are great!
Just screw this into your Rapid and then you can just attach the Female Quick
Disconnect of your hose directly to your Rapid! In addition, you wont lose the
air it takes to re-pressurize the action when re-installing the bottle.
Everything you need, Dowdy Seal, Threaded Fitting and Male Quick Disconnect,
is included $59 (stock modification is required)
In addition, I also have the female connector for Allen Z Bottle quick
disconnect he mounts on Rapids, Feinwerbau, Stey, etc., as well as the older
Air Arms S300, S310, S400, S410 that also use the "air chuck" instead of the
banjo type (picture below is worth a 1000 words). Only $35
Microbore hose x 3 Feet= $39 with strain relief for pumps or tanks
This is a Yellow Forum Special only. If you don't say you saw it on the yellow
and ask for the $39 Hose Special, you will pay more.
These have ALL STEEL Fittings, not brass.
These are very thin microbore (.070" i.d.) VERY flexible, and thin on the
outside (Picture doesn't make them look as thin for some reason but they bend
in a 1.5" radius) These also have a RHINO TOUGH Steel STRAIN RELIEF at each
end. These hoses come in a few standard varieties (but I can make whatever you
need):
1/8" Male NPT x 1/8" Male NPT or 1/4" Male NPT x 1/8" Male NPT or BSPP x
whatever you need to fit your airtank, or hand pump with the addition of a
small adapter for a few bucks extra.
Best way to contact me is either via email, or call 714-612-5956
Joe Brancato
For AirTanks, Custom Hoses, Fittings, Gauges, etc.
please click here
http://www.AirTanksForSale.com